Google DNS Servers

If you are unable to view updated content on your site, it may be due to your Internet Server Provider's (ISP) DNS settings not being updated. You may then point your network settings to Google's DNS servers as it may update more frequently than your ISP. This will not affect your network capabilities.

Microsoft Windows

DNS settings are specified in the TCP/IP Properties window for the selected network connection. 

Example: Changing DNS server settings on Microsoft Windows 7

  1. Go the Control Panel.
  2. Click Network and Internet, then Network and Sharing Center, and click Change adapter settings.
  3. Select the connection for which you want to configure Google Public DNS. For example:
    • To change the settings for an Ethernet connection, right-click Local Area Connection, and click Properties.
    • To change the settings for a wireless connection, right-click Wireless Network Connection, and click Properties.
    If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
  4. Select the Networking tab. Under This connection uses the following items, select Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) and then click Properties.
  5. Click Advanced and select the DNS tab. If there are any DNS server IP addresses listed there, write them down for future reference, and remove them from this window.
  6. Click OK.
  7. Select Use the following DNS server addresses. If there are any IP addresses listed in the Preferred DNS server or Alternate DNS server, write them down for future reference.
  8. Replace those addresses with the IP addresses of the Google DNS servers:
    • For IPv4: 8.8.8.8 and/or 8.8.4.4.
    • For IPv6: 2001:4860:4860::8888 and/or 2001:4860:4860::8844
  9. Restart the connection you selected in step 3.
  10. Test that your setup is working correctly; see Testing your new settings below.
  11. Repeat the procedure for additional network connections you want to change.

Mac OS X

DNS settings are specified in the Network window. 

Example: Changing DNS server settings on Mac OS 10.5

  1. From the Apple menu, click System Preferences, then click Network
  2. If the lock icon in the lower left-hand corner of the window is locked, click the icon to make changes, and when prompted to authenticate, enter your password.
  3. Select the connection for which you want to configure Google Public DNS. For example:
    • To change the settings for an Ethernet connection, select Built-In Ethernet, and click Advanced.
    • To change the settings for a wireless connection, select Airport, and click Advanced.
  4. Select the DNS tab.
  5. Click + to replace any listed addresses with, or add, the Google IP addresses at the top of the list:
    • For IPv4: 8.8.8.8 and/or 8.8.4.4.
    • For IPv6: 2001:4860:4860::8888 and/or 2001:4860:4860::8844
  6. Click Apply and OK.
  7. Test that your setup is working correctly; see Testing your new settings below.
  8. Repeat the procedure for additional network connections you want to change.

Source: https://developers.google.com/speed/public-dns/docs/using
  • 87 أعضاء وجدوا هذه المقالة مفيدة
هل كانت المقالة مفيدة ؟

مقالات مشابهة

PremiereHost's Nameservers and DNS

After ordering hosting from us, you must point your domain to the following nameservers:...

How to Request a Migration

PremiereHost will gladly assist with the migration process of your hosting services from your...

Powered by WHMCompleteSolution